Cabinet Refacing – How to Paint Cabinets to Match

When you reface cabinets, you can also paint them to match. Painting them is an inexpensive but effective way to give your kitchen a new look. While refinishing or refacing is not a good idea for a complete overhaul, it can give your kitchen an entirely new look. And because it can save you a lot of money, you may want to consider it before starting the process. Here’s how to do it.

Measure the opening of your cabinets and the new doors or drawers you want to replace. Add the double overlay distance (e.g., 1/2 in.) to the size of the cabinet doors or drawers you plan to replace. To estimate the overall size of the new cabinets, subtract one-fourth inch from the opening. If you don’t measure the entire opening, you might not get a good result.

Once you’ve measured the openings of your cabinets and determined what size new doors and drawers will need to fit, you’re ready to start the refacing process. You should carefully check the wood to ensure its structural integrity before making any decisions. Additionally, you should pay attention to the texture of the cabinet box. By following these steps, you’ll have a cabinet that looks amazing. Just remember to make sure to get a professional to do the work.

After you’ve decided on the material for the new cabinet doors and drawers, you’ll need to measure the openings of the old ones. Then, take these measurements to determine how much space you’ll need to create your new cabinet doors and drawers. Then, add double overlay distance to the size of your openings, as a rule of thumb, a door with a half-inch overlay would be 19 x 21 inches. After you’ve made sure you’ve found the right size, subtract that amount from the measurement for your new cabinets.

Before you begin, measure the dimensions of the cabinet’s door and drawer openings. You’ll also need to measure the new door and drawers’ dimensions. In most cases, the new cabinet’s openings are the same size as the old ones. For door sizes, you’ll need to add double overlay distance and subtract the size of the new cabinets by 1/4 inch. This will allow the veneers to fit properly.

When you’re ready to do the refacing, you’ll need to measure your new cabinet doors and drawers. Measure the cabinet openings and add double overlay distance. For example, a door with a half-inch overlay would be 19 x 21 in. Then, you’ll need to subtract 1/4 inch from the opening size. After you’ve done all of this, your new cabinets should be ready to receive a new finish.







Leave a Reply

Your email address will not be published. Required fields are marked *